Vol 01 No 01 HSS Contamination of a Refinery Fuel Gas Treater
|
167 KB |
Vol 01 No 02 Impact of Reclaiming on Performance of a Tail Gas Treater
|
144.12 KB |
Vol 01 No 03 Predicting Future Performance and Identifying Process Limitations
|
124.33 KB |
Vol 01 No 04 Contamination of a Treating Solution with Caustic Soda, Part 1
|
157.42 KB |
Vol 02 No 01 Contamination of a Treating Solution with Caustic Soda, Part 2
|
162.77 KB |
Vol 02 No 02 Contamination of a Treating Solution with Caustic Soda, Part 3
|
50.76 KB |
Vol 02 No 03 Forecasting the Future: Tarot Cards, Palmistry, or Simulation?
|
58.79 KB |
Vol 02 No 04 Piperazine Why It's Used and How It Works
|
53.3 KB |
Vol 03 No 02 Tray Hydraulic Operating Regimes and Contactor Performance
|
41.81 KB |
Vol 03 No 03 CO2 Capture from Flue Gas — Part 1: Solvents
|
40.86 KB |
Vol 03 Supplement The Origins of ProTreat
|
39.66 KB |
Vol 03 No 04 Effect of Solvent Temperature on Gas Treating
|
52.66 KB |
Vol 03 No 01 Acid Gas Enrichment — Process Strategies
|
60.74 KB |
Vol 04 No 01 Physical Solvents — DMPEG
|
79.47 KB |
Vol 04 No 02 Capturing CO2 With Sodium Glycinate
|
57.19 KB |
Vol 04 No 03 Conflicted Meanings of Rate Based
|
151.72 KB |
Vol 04 No 04 Why What's in Your Tower Matters
|
140.45 KB |
Vol 04 No 05 Dehydration Using TEG
|
58.12 KB |
Vol 04 No 06 Generic MDEA? When, and What Strength?
|
79.58 KB |
Vol 05 No 01 So What Amine Simulator Should I Use? How to Decide
|
51.4 KB |
Vol 05 No 02 Stable Operating Limits for Amine Absorbers
|
360.25 KB |
Vol 05 No 03 Effect of Amine Strength & Temperature on Gas Treating
|
212.53 KB |
Vol 05 No 04 Stability Limits for Amine Regenerators: Feed Temperature
|
334.49 KB |
Vol 05 No 05 Stability Limits for Amine Regenerators: Reboiler Duty
|
251.14 KB |
Vol 05 No 06 Ammonia Distribution in Refinery Amine Systems
|
437.14 KB |
Vol 06 No 01 Confident Design - Effect of Solvent Contamination
|
132.42 KB |
Vol 06 No 02 VOC and HAP Emissions
|
284.61 KB |
Vol 06 No 03 Ammonia Distribution in Sour Water Strippers
|
346.66 KB |
Vol 06 No 04 Confidence in Design — Are All the Parameters Real?
|
83.33 KB |
Vol 06 No 05 Extreme Sensitivity to Solvent Temperature in the CO2 Removal Section of an Ammonia Plant
|
117.61 KB |
Vol 06 No 06 Projected Performance Curves for a Planned LNG Plant
|
134.67 KB |
Vol 07 No 01 Lean-, Rich-, and Bulge-Pinches in Carbon Capture
|
214.58 KB |
Vol 07 No 02 Reboiler Types and Regenerator Performance
|
126.59 KB |
Vol 07 No 03 Foaming and Mass Transfer Performance
|
231.82 KB |
Vol 07 No 04 Confidence in Design — Got the CO2 Slip Right?
|
511.55 KB |
Vol 07 No 05 Confidence in Design — But the Column's Packed: What Now?
|
383.32 KB |
Vol 07 No 06 Confidence in Design — When to Consider Packing
|
319.58 KB |
Vol 07 No 07 What's Data and What's Not
|
244.97 KB |
Vol 07 No 08 Confidence in Design — Effect of Packing Size
|
372.89 KB |
Vol 07 No 09 How Stripping Promoters Work
|
336.15 KB |
Vol 07 No 10 Behavior of HCN in Sour Water Strippers
|
482.51 KB |
Vol 07 No 11 HCN and Phenol in a Refinery Sour Water Stripper
|
335.19 KB |
Vol 07 No 12 Effect of Tower Internals on CO2 Slip
|
228.94 KB |
Vol 08 No 01 Water-washing Amine Unit Feed to Remove HCN
|
215.24 KB |
Vol 08 No 02 Predicting Corrosion Rates in Amine and Sour Water Systems
|
395.92 KB |
Vol 08 No 03 Blowing Down Ammonia in Amine Regenerators
|
219.56 KB |
Vol 08 No 04 Mass Transfer Rate Models and Reliability
|
399.31 KB |
Vol 08 No 05 All Heat Stable Salts Are Equal, or Are They?
|
312.24 KB |
Vol 08 No 06 Deeper Weirs Are Better, Sometimes
|
313.58 KB |
Vol 08 No 07 Quench Towers Are Mass Transfer Devices, Too
|
362.69 KB |
Vol 08 No 08 Optimal Circulation Rate in a TGTU Quench System
|
532.71 KB |
Vol 08 No 09 Pinches and Profiles
|
558.63 KB |
Vol 08 No 10 Effect of a Tower Swage on Packing Performance
|
264.65 KB |
Vol 08 No 11 Temperature Control in a Split-flow Absorber in LNG
|
498.85 KB |
Vol 08 No 12 Mass Transfer Pinches in Amine Treaters Part I: Lean-end Pinch Using MEA
|
333.69 KB |
Vol 09 No 01 Mass TransferPinches in Amine Treating, Part II
|
473.98 KB |
Vol 09 No 02 Mass Transfer Pinches in Amine, Treating Part 3
|
494.2 KB |
Vol 09 No 03 Improve Deep CO2 Removal with Intercooling
|
450.27 KB |
Vol 09 No 04 An Odd Regenerator?
|
226.28 KB |
Vol 09 No 05 Stahl Columns
|
383.75 KB |
Vol 09 No 06 The H2S Stripper in 2-Stage Sour Water Stripping
|
370.64 KB |
Vol 09 No 07 Phosphoric Acid in DEA
|
429.12 KB |
Vol 09 No 08 Corrosion Troubleshoot
|
342.02 KB |
Vol 09 No 09 Dealing with Methanol in an Amine Unit
|
388.81 KB |
Vol 09 No 10 Performance of Stahl Columns in Glycol Dehydration
|
386 KB |
Vol 09 No 12 TEG-Contaminated Amine Treating Solvents
|
327.13 KB |
Vol 10 No 01 Effect of Glycol Contamination on Amine Treating
|
280.59 KB |
Vol 10 No 02 Effect of MMEA Contamination on Selectivity in TGTUs
|
442.58 KB |
Vol 10 No 03 Effect of MMEA Contamination on Acid Gas Enrichment
|
403.35 KB |
Vol 10 No 04 Centrifugal Processing: So Just What is HIGEE?
|
268.73 KB |
Vol 10 No 05 Methanol in NGLs
|
346.3 KB |
Vol 10 No 06 The Case of the Corroding Regenerator
|
504.47 KB |
Vol 10 No 07 Making Sense of Absorber Temperature Profiles
|
528.81 KB |
Vol 10 No 08 Effect of Packing Size on Absorber Bulge Temperature
|
475.93 KB |
Vol 10 No 10 Approach to Equilibrium: Part 1 — Absorbing a Single Acid Gas
|
539.57 KB |
Vol 10 No 11 Ammonia Destruction in SRUs — 1. Furnace Types and Mechanism
|
462.06 KB |
Vol 10 No 12 Approach to Equilibrium: Part 2 — Completely Removing Two Acid Gases
|
491.45 KB |
Vol 11 No 01 ProTreat's COM Interface
|
357.99 KB |
Vol 11 No 02 Ammonia Destruction in SRUs — 2. One-zone Furnaces
|
520.14 KB |
Vol 11 No 03 Approach to Equilibrium: Part 3 — Selective CO2 Removal
|
474.43 KB |
Vol 11 No 04 Ammonia Destruction in SRUs — Two Zone Furnaces
|
535.17 KB |
Vol 11 No 05 Keeping Amine in the System
|
369.85 KB |
Vol 11 No 06 Where to Add Regenerator Energy
|
409.25 KB |
Vol 11 No 07 Supersaturation in TGU Quench Towers
|
435.92 KB |
Vol 11 No 08 Do Amine Absorbers Always Have a Temperature Bulge?
|
570.69 KB |
Vol 11 No 09 Simulating the Waste Heat Boiler in an SRU
|
607.22 KB |
Vol 11 No 10 Packing Size and Syngas Absorber Temperatures
|
879.79 KB |
Vol 11 No 11 Differences between Simulators: Waste Heat Boiler Models
|
557.95 KB |
Vol 10 No 09 Corrosion from High Ammonia in an SRU
|
381.08 KB |
Vol 11 No 12 Pinch Analysis of a TGTU Absorber
|
494.78 KB |
Vol 12 No 01 Sulfur Condensers at Turndown
|
298.75 KB |
Vol 12 No 02 Oxidized Lean Loading
|
320.98 KB |
Vol 12 No 03 Temperature Measurement in the Claus Furnace
|
251.88 KB |
Vol 12 No 04 Treating Sensitivity to Lean Loading
|
317.76 KB |
Vol 08 No 01 Water Washing for HCN Removal
|
215.24 KB |
Vol 12 No 05 Sulphur Converter Kinetics
|
466.32 KB |
Vol 12 No 06 SWS Pumparound Condensers
|
412.81 KB |
Vol 12 No 07 Measuring Claus Furnace Temperature
|
334.9 KB |
Vol 12 No 8 Amine Direct Contact Condensers
|
339.09 KB |
Vol 12 No 09 Effect of WHB Design on Heat Flux, Tube Wall Temperature, Sulfidic Corrosion
|
517.56 KB |
Vol 12 No 10 Tray and Packing Hydraulics
|
212.04 KB |
Vol 12 No 11 Factors Affecting WHB Design & Operation: Part 1
|
268.3 KB |
Vol 12 No 12 Improve Acid Gas Enrichment via Enriched Gas Recycle
|
252.2 KB |
Vol 13 No 01 Factors Affecting WHB Design and Operation: Part 2
|
335.38 KB |
Vol 13 No 02 Can Contactor Overhead Gas Be Supersaturated with Water?
|
298.78 KB |
Vol 13 No 03 Efficient Sulphur Conversion: Hot Gas Bypass or Direct Reheat?
|
234.66 KB |
Vol 13 No 04 Regenerators - Why Purge Condensate
|
219.97 KB |
Vol 13 No 05 Efficient Sulphur Conversion, Part 2
|
294.8 KB |
Vol 13 No 06 Purging Condensate to Remove Heat Stable Salts
|
560.1 KB |
Vol 13 No 07 Causes of Claus Catalyst Deactivation
|
280.3 KB |
Vol 13 No 08 Trays and Packing Perform Differently
|
323.48 KB |
Vol 13 No 09 Sulphur Processing During Startup, Shutdown, and Turndown-Part I
|
242.12 KB |
Vol 13 No 10 Removing Mercaptans
|
398.33 KB |
Vol 13 No 11 Sulphur Processing During Startup, Shutdown and Turndown - Part 2
|
331.4 KB |
Vol 13 No 12 Effect of Trace Contaminants on CO2 Solubility in MDEA
|
354.44 KB |
Vol 14 No 01 AssessClaus Unit Performance: Part 1
|
431.57 KB |
Vol 14 No 02 Effect of HSSs on Mercaptans Solubility in Amines
|
448.17 KB |
Vol 14 No 03 Assess Claus Unit Performance: Part 2
|
491.8 KB |
Vol 14 No 04 Enhanced Stripping of MDEA Using H3PO4
|
404.18 KB |
Vol 14 No 05 Assess Claus Unit Performance Part III
|
285.62 KB |
Vol 14 No 06 Numerical Segmentation of Packed Beds
|
164.44 KB |
Vol 14 No 07 Sulfidation Corrosion in a Waste Heat Boiler
|
308.38 KB |
Vol 14 No 08 Dehydration Using TEG
|
342.62 KB |
Vol 14 No 09 Internals for Claus TGTU Absorbers
|
213.36 KB |
Vol 14 No 10 Stahl Column Performance
|
276.57 KB |
Vol 14 No 11 What Affects Efficiency
|
505.85 KB |
Vol 14 No 12 Vaporization Losses and Mixed Solvents
|
365.93 KB |
Vol 15 No 01 Layered Catalysts in an SRU
|
329.08 KB |
Vol 15 No 02 Regenerator Feed Temperature - How Hot is Too Hot?
|
273.55 KB |
Vol 15 No 03 Thermal Reactor Heat Loss
|
403.83 KB |
Vol 15 No 04 Sensible Heat Transfer in Amine Towers
|
297.87 KB |
Vol 15 No 05 Acid Gas Fired Reheater Control - Part 1
|
314.91 KB |
Vol 15 No 06 How Hydraulics Affects Efficiency in Towers — Part 1: Trays
|
461.43 KB |
Vol 15 No 07 Acid Gas Fired Reheater Control - Part 2
|
297.43 KB |
Vol 15 No 08 How Hydraulics Affects Efficiency in Towers — Part 2: Packing
|
505.34 KB |
Vol 15 No 09 Steam Reheaters at Turndown in an SRU
|
244.89 KB |
Vol 15 No 10 Regenerating Wet Glycols
|
286.02 KB |
Vol 15 No 11 Titania Catalyst Placement in a Claus SRU Convertor
|
283.48 KB |
Vol 15 No 12 CO2 Capture — 90% or Higher?
|
251.65 KB |
Vol 16 No 01 Titania Catalyst Placement in a Claus SRU Convertor — Part II
|
250.34 KB |
Vol 16 No 02 Gas Treating with Hybrid Solvents
|
331.53 KB |
Vol 16 No 03 Post-Combustion Carbon Capture - Is MEA the Best Benchmark?
|
285.92 KB |
Vol 16 No 04 Cleaning Landfill Gas
|
351.7 KB |
Vol 16 No 05 COS Removal: Finally, Accurate Simulation
|
302.92 KB |
Vol 16 No 06 Claus Tail Gas Hydrogenation
|
260.37 KB |
Vol 16 No 07 Effects of Packing Type and Size on Treating: Part 1 — LNG Production
|
428.27 KB |
Vol 16 No 08 Effects of Packing Type and Size on Treating: Part 2 — Selective H2S Removal
|
487.58 KB |
Vol 16 No 09 SRU Thermal Oxidizer
|
360.08 KB |
Vol 16 No 10 Approaches to Simulating Distillation
|
305.84 KB |
Vol 16 No 11 Sneaky SO2 Breakthroughs
|
341.59 KB |
Vol 16 No 12 Paint it Blue (Part I): Hydrogen Production by Steam-Methane Reforming
|
663.24 KB |
Vol 17 No 01 Using SulphurPro® to Simulate Hydrogenation in an SRU
|
531.22 KB |
Vol 17 No 02 Paint it Blue (Part II): CO2 Removal in Steam-Methane Reforming
|
275.34 KB |
Vol 17 No 03 Removing Sulfur Compounds from Gases
|
461.62 KB |
Vol 17 No 04 Quench Towers
|
339.38 KB |
Vol 17 No 05 Heat Stable Salts I: Jargon
|
353.66 KB |
Vol 17 No 06 Heat Stable Salts II
|
207.19 KB |
Vol 17 No 07 Heat Stable Salts III - Management
|
357 KB |
Vol 17 No. 08 Heat Stable Salts IV - Case Study
|
400.98 KB |
Vol 17 No 09 Sulphur Degassing
|
197.85 KB |
Vol 17 No 10 Characteristics of PCCC
|
205.95 KB |
Vol 17 No 11 Corrosion in Amine Systems
|
265.55 KB |
Vol 17 No 12 CAPE-OPEN - What It Is and Why It Matters
|
235.6 KB |
Vol 18 No 01 Gas Treatment with Contaminated Solvents
|
203.99 KB |
Vol 18 No 02 Contaminated Solvents — Effect of Reclaiming on Performance of a Tail Gas Treater
|
429.79 KB |
Vol 18 No 03 Contaminated Solvents -- Methanol in Amines
|
336.38 KB |
Vol 16 No 04 Contaminated Solvents: Ammonia Buildup
|
491.88 KB |
Vol 18 No 05 Contaminated Solvents: DEA and MMEA in MDEA
|
372.4 KB |
Vol 18 No 06 Removal of HCN in Sour Water Strippers
|
716.16 KB |
Vol 18 No 07 Foaming in Amine Systems
|
401.17 KB |
Vol 18 No 08 Capturing CO2 with an Amino Acid
|
349.04 KB |
Vol 18 No 09 How Temperature Affects Treating - Not as Simple as It Seems
|
248.31 KB |
Vol 18 No 10 Mercaptans Removal by Absorption into Amines vs. Caustic Soda
|
319.07 KB |
Vol 18 No 11 The Case for Kinetics-based SRU Simulation
|
219.22 KB |
Vol 18 No 12 HCN in Refinery Gases
|
301.63 KB |